Bambu Lab AMS 2 Pro Upgrade Kit For X1/P1 Series

Required for use with any of the following printers: 

- P1P

- P1S

- X1C

- X1E

For X1/P1 Series Printer:

1. Drying Function Requirement:
- A power adapter must be used when enabling the drying function to ensure sufficient power.

2. Connecting multiple AMS 2 Pro units together:
- If the drying function is enabled for multiple units, each AMS 2 Pro requires its own Switching Adapter.

3. Non-Drying Function Use:
- The Switching Adapter can be omitted if the drying function is not used.

Notes:

1. For H2D Printer:
- You can directly connect multiple AMS 2 Pro units using the 6-pin cable.

2. For X1/P1 Series Printer：
- If you plan to connect multiple AMS 2 Pro units together, you will need to purchase the AMS 2 Pro Upgrade Kit 2 (with AMS Hub inside)
- The AMS 2 Pro is compatible with X1/P1 series printers for multi-material printing. The filament drying feature for these older generation machines will be fulfilled through an OTA update by the end of April.

In the Box

AMS 2 Pro Upgrade Kit 1:
- Filament Buffer *1
- Bambu Bus Cable - 4Pin *1
- AMS 2 Pro Switching Adapter *1

- PTFE Tube Coupler *3

- PTFE Tubes 370mm*1 + 550mm*2

(64500)