Bambu PA6-GF - Glass Fibre Reinforced Nylon

Bambu PA6-GF (Nylon 6 with Glass Fibre) is a top-tier engineering filament available at 3D Printer Gear, Australia’s trusted source for 3D printing materials. Renowned for its exceptional strength, durability, and dimensional stability, PA6-GF offers outstanding performance for demanding applications. This high-performance filament is also a more cost-effective option compared to other premium engineering materials, making it an excellent choice for Australian makers and engineers.

• High-Performance Material: Bambu PA6-GF (Nylon 6 with Glass Fibre) offers exceptional strength, durability, and dimensional stability.
• Excellent Thermal Resistance: Performs reliably in high-temperature environments, making it suitable for engineering-grade applications.
• Cost-Effective: More affordable than other premium engineering filaments, providing great value.
• Engineered for Demanding Applications: Ideal for projects requiring toughness and thermal stability.

Printing Tips

• • Bambu PA6-GF needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 to 12 hours in a blast drying oven, or 90 to 100 ℃ for 10 to 12 hours on heat bed. (Do not exceed 100 ℃ because the spool may deform or even melt). For more details, please refer to:Printing tips for Engineering materials on WIKI.

  • To prevent the filament from absorbing moisture, it is recommended to use an airtight storage container with desiccant during printing. For more details, please refer to:Printing tips for Engineering materials on WIKI.

  • To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing.

  • For better print results and more details, please refer to:Printing tips for Engineering materials on WIKI.

   

  Post-processing Tips

  • We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.

  • Placing the printed part in a convection oven set between 80 to 130 degrees Celsius for 5 to 12 hours can further enhance the strength and rigidity of the print. Note: The effectiveness of this process depends on the structure, size, and conditions of the printed model. Some models may warp or deform after annealing. 

Downloads

Bambu Lab PA6-GF Glass Fibre Technical Data Sheet 

Bambu Lab PA6-GF Material Safety Data Sheet 

Bambu Lab PA6-GF RoHS

(61973)