Bambu PC FR

At 3D Printer Gear, we’re proud to offer Bambu PC FR, a high-performance polycarbonate filament engineered for the most demanding applications. With superior flame retardancy, exceptional impact resistance, and remarkable heat stability, Bambu PC FR is built to perform under pressure. Whether you're creating industrial components, protective casings, or parts for high-temperature environments in sectors like automotive, electronics, and manufacturing, this filament delivers outstanding durability and reliability. Trust 3D Printer Gear, your authorized Bambu partner, to supply the cutting-edge materials that bring your toughest projects to life.

 

Top-Tier Flame Retardancy

Certified to the UL 94-2023 V-0 standard, the top level of flame resistance for 3D printing filament, Bambu PC FR is engineered to prevent or slow flame propagation with exceptional self-extinguishing properties. Ideal for critical applications in electronics, automotive, and mechanical engineering.

* UL 94 is a plastics flammability standard established by Underwriters Laboratories (USA). V-0—the highest UL 94 V rating—indicates that burning stops within 10 seconds on a vertically positioned specimen, with dripping particles allowed as long as they are not ignited.

 

 

Engineering-Level Mechanical Properties

Bambu PC FR is an engineering-grade material with toughness comparable to PAHT-CF. Its exceptional stiffness and strength make it a top choice for structural components and protective casings.

 

PC FR Hex Code Table

 

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

 

Accessory Compatibility

 

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Filament UL 94 Test Report

 

Printing Tips

 

Drying Conditions：

Dry before use for higher printing quality. PC FR must be dried before use and kept moisture-free during the printing process. Store in a dry environment, such as an airtight storage container with a desiccant, after use. For more details, please refer to:Printing tips for Engineering materials on WIKI.

• In a blast drying oven: 80°C for 8 hours.
• On an X1 printer's heatbed: 90°C to 100°C for 12 hours.

Safety Attention:

The nozzle temperature should be between 260-280°C, and the heat bed temperature should be between 90-110°C. Please ensure safety during printing.

(64430)