K2 Plus Combo
Epic Leap of Color & Size

Next-level Professional 3D Printer

• CFS for Multicolor 3D Printing
• 350mm Cubed Print Size
• Actively Heated Build Chamber
• 60°C
• Dual AI Cameras

Intelligent Management of Multiple Filaments

Auto Identification & Mapping | Auto Run-out/Tangle Detection Auto Filament Switch & Relay | Moisture-proof Filament Storage Spring-loaded Batten Bar | Cardboard Spool Compatibility

16 Colors Level Up Your Creativity

The CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors. Saves the need for extra painting afterward.

Powerfully Built "Matrix" Frame

A Sturdy, King-sized Beast

Dual Z-axis Assisted by 4 Linear Rods

Extremely steady while carrying the print bed up and down. Users will no longer have to worry about layer shifts occuring throughout their printing experience.

5mm Thick Aluminum Alloy Heatbed

Holding exceptionally well against deformation and vibratioon.




                                                                     

Precise Steel X-axis Linear Rail

Incredibly Quiet While Printing Hard

The working noise of K2 Plus is only 45dB, which is credited tothe virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.

Blazing Speed, a New Record

For a large-format machine, 600mm/s is pretty fast, but that's not the whole story. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s²*.

Active Belt Tensioning

Timing belts may get loose over time, leading to poor printquality and accuracy. On the K2 Plus, the belt tension is checked and rigged actively by a pressure sensor instead of marhually Now, belt tensioning is a thing you can forget about.

Automated Run-out & Sensor Filament Cutter

The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.

Next-gen Direct Drive Extruder

So Many Features Neatly Packed

40mm³/s High-flow Hotend

Powered by an 80W heater, the flow rate of ABS at 280℃ can reach 40mm³/s*, 66% higher than the previous design.

Actively Heated Chamber & High-temp

Nozzle with Hardened Steel Tip

Empowering More Use Scenarios & Phenomenal Print Quality, Every Time

Two Auxiliary Fans Set the Style Right Off

The part cooling airflow is nearly doubled as two auxiliary cooling fans are installed on the left and right sides of the chamber. The shapes and styles of your model will be set before any stringing and warping can happen.

Dual Al Cameras and Many More

Advanced Intelligence Has Your Back

Chamber AI Camera Keeps a Keen Watch

K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. It also supports real-time monitoring and time-lapse filming.

Toolhead Al Camera

Tunes the Flow Rate

Ingenious Anti-tilt Auto Leveling

K2 Plus features dual independently motorized Z-axes for automatic tilt reduction, strain gauge-based auto-leveling compensation, and a pro-level first layer capability that ensures a smooth and neat initial layer without manual intervention.

Smarter Software for a Seamless Workflow

The latest Creality OS will unlock the full power of your 3D printter. It features smart multi-filament management and allows for fire-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.

User-friendly Like a Household Appliance

K2 Plus is pre-assembled, so you can use it right after unpaacking and screen installation. Then, a boot-up quick guide covers self-tests.

Awesome Features Others May Not Offer

K2 Plus Combo 3D Printer

Printing Technology: Fused Deposition Modeling

Build Volume: 350*350*350mm

K2 Plus Dimensions: 495*515*640mm

K2 Plus Combo Dimensions: 495*515*916mm

K2 Plus Net Weight: 35Kg

Printing Speed: <600mm/s

Acceleration: 30000mm/s²

Printing Accuracy: 100mm±0.1mm

Layer Height: 0.05-0.3mm

Extruder: Dual-gear direct drive extruder

Filament Diameter: 1.75mm

Nozzle Diameter: 4mm

Nozzle Temperature: ≤350°C

Heatbed Temperature: ≤120°C

Chamber Temperature: ≤60°C

Build Plate: Flexible build plate

Leveling Mode: Full-auto Leveling

XYZE Motor: Servo-step motor

File Transfer: USB Drive/Ethernet/WiFi

File Storage: 32GB EMMC

Wifi: 2.4GHz/5GHz

RFID Sensor in Printer: Included

Rated Voltage: 100-240V~ AC 50/60Hz

Display Screen: 4.3" color touch screen

Rated Power: 1200W

Supported Filaments: PLA/ABS/PETG/PA-CF/ PLA-CF/ PET/ASA/PPA-CF

Al Camera for Monitoring: Standard

Al Camera for Monitoring: Standard

Power Loss Recovery: Yes

Auto Filament Relay: Yes

Filament Tangle Detection: Yes

Air Purifier: Yes

Input Shaping: Yes

Lighting kit: Yes

Active Bed Tilt Calibration: Yes

Active Belt Tensioning: Yes

Active Chamber Heater: Yes

RFID-tagged Filaments: Yes

Printable File Format: Gcode/3MF

CFS Compatibility: Yes
Number of CFS Extensions: ≤4
Slicing Software: Creality Print 5.0 or newer versions
UI Languages: English/German/Spanish/French/Italian/ Portuguese/Russian/Turkish/Japanese/ Korean/Chinese

CFS SPE

Dimensions: 379*314*276 mm

Net Weight: 4.56kg

Number of Filament Slots: 4

Drying Method: Desiccant

Filament Buffer: IN*4 & OUT*1

Number of Extensions: ≤4

RFID Filament Recognition: Yes

Filament Diameter: 1.75±0.05mm

Supported 3D Printer: K2 Plus

Connection Port: Creality 485 *2

Power Supply: DC 24V (No need of extra power supply while connected to K2 Plus)

Rated Power: 20W

Status Indicator: Indicator light (white/red) x 4

Display Screen: Segment LCD showing temperature and humidity

Filament Spool Compatibility: 1Kg filament spool; diameter: 197-202mm, thickness: 42-68mm

Supported Filaments: PLA/PETG/ABS/ASA/PET/PLA-CF; *Not compatible with flexible TPU damp BVOH/PVA, or warped cardboard spools.